Pentax 16301 K-x Black K-x Manual - Page 169
Wireless Shooting, Set the wireless mode of the external flash directly
UPC - 027075159440
View all Pentax 16301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
167 Wireless Shooting Using a Combination of the Built-in Flash and an External Flash Unit 1 Remove the external flash unit after the channel is set on the camera, and place it at the desired location. 2 Set the camera flash to r mode, and press the K/i button. 3 Confirm that both flashes are fully charged and then take a picture. Using the Flash Using a Combination of External Flash Units 5 1 Set the wireless mode of the external flash directly connected to the camera to [MASTER] or [CONTROL]. MASTER CONTROL Sets the camera to discharge both the flash directly connected to the camera and the wireless flash unit. Sets the camera to discharge the flash directly connected to the camera as a control flash only, not as the main flash. 2 On the wireless remote flash unit, set the wireless flash mode to [SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place it at the desired location. 3 Confirm that both flashes are fully charged and then take a picture. • The Shake Reduction function is automatically turned off in wireless mode. • When using multiple AF540FGZ/AF360FGZ external flashes and performing high-speed flash sync shooting in wireless mode, set the flash directly connected to the camera to high-speed flash sync mode.