Pentax 16301 K-x Black K-x Manual - Page 196

194 Setting the Image Finishing Tone Shooting Settings Setting Custom Image You can set the image finishing tone before shooting when the capture mode is set to e (Program), K (Sensitivity Priority), b (Shutter Priority), c (Aperture Priority) or a (Manual). Select from the following seven modes for Image Tone: Bright (default setting), Natural, Portrait, Landscape, Vibrant, Muted and Monochrome. You can adjust the following items for Image Tone. Item Saturation*1 Hue*1 Settings Sets the color saturation. (Available settings: -4 to +4) Sets the color. (Available settings: -4 to +4) High/Low Key Adj Changes the brightness of the image. (Available settings: -4 to +4) Contrast 6 Sharpness*2 Sets the image contrast. (Available settings: -4 to +4) Sets the sharpness of the image outlines. (Available settings: -4 to +4) Filter Effect*3 Changes the contrast to appear as if a B&W color filter was used. Sets the filter color. (Available settings: [None], [Green], [Yellow], [Orange], [Red], [Magenta], [Blue], [Cyan], [Infrared Filter]) Toning*3 Sets the level for cold tone adjustment (- direction) and warm tone adjustment (+ direction). (Available settings: -4 to +4) *1 This can be set when any mode other than [Monochrome] is selected. *2 You can also change the setting to [Fine Sharpness], which makes image outlines even thinner and sharper. *3 This can be set when [Monochrome] is selected. Custom Image cannot be used when Cross Processing is set. 1 Press the M button in the status screen. The control panel appears. Press the M button when the status screen is not displayed.