Pentax A3000 A3000 Manual - Page 10
clockwise.
View all Pentax A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
• rrTAX • 6 ATTACHING AND DETACHING LENS To mount or interchange Pentax K, KA and Kf mount lenses follow the steps below. • Remove the body mount cap and the rear lens cap. If the finder cap is still on the eyepiece, remove it. • Align the red dot on the camera body with the red dot on the lens (See 0, 0). Seat the lens in the body mount and turn it clockwise until the lens locks with a click. When mounting the lens in dim light, method (Q) is recommended. This method allows lens mounting by touch. Align the raised node on lens barrel with the lens release by touch. Then turn and lock as above. • To remove the lens cap, press in on the notches at both sides. • To remove the lens, press the lens release lever toward the camera body while turning the lens counter -clockwise. • After removing a lens from the camera body, replace the front and rear lens caps to protect the lens from dust and stains. Note: Don't damage or stain the electrical contact points on the mount face. When they become stained, wipe them with a clean, dry cloth.