Pentax Spotmatic Spotmatic Manual - Page 20
Important, notes
View all Pentax Spotmatic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Important notes Always keep the meter switched off when not actually taking readings. Leaving the meter switched on will rapidly exhaust the battery. It is also necessary to keep the meter switched off when mounting a Super-Takumar lens on the Spotmatic camera body. If it is switched on, the tip • of the automatic diaphragm release pin of the lens will hit the pin release plate inside the camera body and it may get damaged. 2 - When removing the Super-Takumar ,,,,• yv . , 50mm f/1.4 lens from the camera body, do not place it on its threaded end without the rear mount cap in place, or you will scratch its rear element lens. 1. I-) t ._ B Ai ct, c>\ v^E'..-, Af o9 ..e..'z:O' oo Lo Oxclss' Pei vt ,. 5 - When the index of the shutter speeds turns to red, it indicates that the shutter and film speed settings are off the meter's measurability range. Change the shutter speed setting to a faster or slower setting. Refer to page 15. When the meter is switched on, the lens (any Super-Takumar lens) is in its manual position even when the diaphragm preview lever is in "AUTO" (automatic) position. When the meter is switched off manually, or automatically after shutter release, the lens returns to its automatic position when it is set in "AUTO" position. 18