Pfaff 261 Owner's Manual - Page 13

Inserting a Full Bobbin into Bobbin Case As shown in illustration 1, hold bobbin in left hand sa that the thread end falls from the top down toward you, and insert bobbin into bobbin case. © Hold the bobbin firmly in the bobbin case and pull the thread into the case slot. Pull the thread under the tension spring until it emerges from the opening at the end of the spring. Leave about three inches of thread hanging from the bobbin case. Hold the case by its open latch, so that the bobbin cannot fall out. 'F R 8001 Removing the Bobbin Case A Operate the Stopmatic lever to raise the needle, open the bed slide, so you can see sewing hook. and Reach under the machine with your left hand and lift latci k with your forefinger. Pull out bobbin case with bobbin by holding the latch. When you release latch k the empty bobbin drops out. 12