Pfaff 63 Owner's Manual - Page 6

Li 3. Setting Up the Machine Place pedal starter under the table and plug the cable into the motor socket. Place the sewing machine case on table and unlock it. Pull the flap lighti Attention and the snap bow will release the cas Dont plug your machine into the line unless you have made sure that the line voltage top. corresponds to the voltage given on the motor plate of your machine (check the cur Lift the top and remove it, holding th rent meter to make sure of the line voltage). cable bag in your left hand. Place the pedal starter within convenient reach. Take pedal starter from top cover on A sliqht pressure exerted with the foot cuts in the machine and it commences swina unpack cable. The farther you depress the starter, the faster will the machine sew. Photo 4 9