Pfaff SMARTER BY 260c Manual - Page 20

Lowering feed dogs, Presser foot lift, Changing the presser foot, Remove presser foot

Page 20 highlights

Preparations Lowering feed dogs You can lower the feed dogs by moving the switch at the back of the free arm to the left. Move the switch to the right if you wish to raise the feed dogs. Note: The feed dogs will not raise immediately when the lever is switched. Turn the handwheel one full turn or start sewing to re-engage the feed dogs. Presser foot lift The presser foot is lowered or raised with the presser foot lift. If you are sewing on heavy fabric or several layers of fabric, the presser foot can be raised higher to make it easier to place the fabric underneath the presser foot. Changing the presser foot Remove presser foot Press the presser foot downwards until it disengages from the presser foot holder. Attach presser foot Place the presser foot under the presser foot holder (A), lining up the notch (C) with the pin (B). Lower the presser foot lift and the presser foot will engage in the presser foot holder. Note: Check that the presser foot is properly attached by raising the presser foot lift. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Preparations
Lowering feed dogs
You can lower the feed dogs by moving the switch at
the back of the free arm to the left. Move the switch to
the right if you wish to raise the feed dogs.
Note: The feed dogs will not raise immediately when the lever
is switched. Turn the handwheel one full turn or start sewing
to re-engage the feed dogs.
Presser foot lift
The presser foot is lowered or raised with the presser
foot lift. If you are sewing on heavy fabric or several
layers of fabric, the presser foot can be raised higher to
make it easier to place the fabric underneath the presser
foot.
Changing the presser foot
Remove presser foot
Press the presser foot downwards until it disengages
from the presser foot holder.
Attach presser foot
Place the presser foot under the presser foot holder (A),
lining up the notch (C) with the pin (B).
Lower the presser foot lift and the presser foot will
engage in the presser foot holder.
Note: Check that the presser foot is properly attached by
raising the presser foot lift.
20