Pfaff coverlock 4772 Owner's Manual - Page 65

Cover-stitch, guide, Working

Get Pfaff coverlock 4772 PDF manuals and user guides View all Pfaff coverlock 4772 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Cover-stitch guide set You can hem T-shirts, sweatshirts etc. with this accessory set. Setting the machine Set the machine to the cover stitch (see page 30 - 33). Note: Use guide C and D. Working: Loosen the needle plate screw by half a turn and open the looper cover. Push guide D, as shown in illustration 1, along position 'x" fully under the needle plate. The lower edge of the guide and the edge of the needle pla te should flush. Fully tighten the screw and close looper cover. Place guide C, as shown in illustration 2, onto the cover-stitch foot and fasten both using the small screw and the washer. Turn up the seam and adjust guide C according to the width of the seam. D C Place the fabric with the top side up under the presser foot. The hemmed seam is in guide D, the crease is in guide C. Sew the seam and on completion remove guides C and D. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Cover-stitch
guide
set
You
can
hem
T-shirts,
sweatshirts
etc.
with
this
accessory
set.
Setting
the
machine
Set the machine
to
the
cover
stitch
(see
page
30
-
33).
Note:
Use
guide
C
and
D.
Working:
Loosen
the
needle
plate
screw
by
half
a
turn
and
open
the
looper
cover.
Push
guide
D,
as
shown
in
illustration
1,
along
position
‘x”
fully
under
the
needle
plate.
The
lower
edge
of
the
guide
and
the
edge
of
the
needle
pla
te
should
flush.
Fully
tighten
the
screw
and
close
looper
cover.
Place
guide
C,
as
shown
in
illustration
2,
onto
the
cover-stitch
foot
and
fasten
both
using
the
small
screw
and
the
washer.
Turn
up
the
seam
and
adjust
guide
C
according
to
the
width
of
the
seam.
D
Place
the
fabric
with
the
top
side
up
under
the
presser
foot.
The
hemmed
seam
is
in
guide
D,
the
crease
is
in
guide
C.
Sew
the
seam
and
on
completion
remove
guides
C
and
D.
C
61