Pfaff creative coverlock 4874 Owner's Manual - Page 40
Thread cutter, Check spring for edging the thread chain
View all Pfaff creative coverlock 4874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Thread cutter At the end of a seam, sew a thread chain of 15 to 20 cm (7"-10") and pull the thread chain from back to front over the thread cutter (47). This will cut off the thread chain. Check spring for edging the thread chain Use the check spring for edging the thread chain (37) to edge the thread chain at the start of the seam. To do this, sew a thread chain at least 10 cm long before you begin the seam. Raise the presser foot and pull the thread chain carefully away from the stitch finger (32). Draw the thread chain forwards and secure it under the spring. Note: This technique cannot be used for the 5-thread safety seam, the 4-thread safety seam, the double chain stitch, the rolled hem, or for sewing in the fabric (progs. 01-03, 21-30). Place the fabric just in front of the needle(s). If necessary, first cut about 3 cm along the cutting line with a pair of scissors. Lower the presser foot and start sewing. The thread chain will be drawn inside the seam automatically. 2-26