Pfaff quilt expression 2044 Owner's Manual - Page 119
Pfaff quilt expression 2044 Manual
View all Pfaff quilt expression 2044 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
I !' I I I I I Problem/Cause The machine does not feed or feeds irregularly Sewing lint has collected between the feed dog teeth rows. Feed dog is lowered. Slide A is at the left or slide B is at the right (see page 34) The needle plate is not lying flat. 1emedy Remove needle plate, remove lint with brush. Push slide A to the right or slide B to the left. Press downwards at the front of the needle plate until you hear it snap into place. The machine is running with difficulty There are thread remnants in the hook ways. Remove the threads and apply a drop of oil to the hook. The machine does not sew the selected stitch Switch off the machine, wait 10 seconds and switch on again. Select the desired stitch again. Before changing presser feet and needle the main switch must be switched off. Do not attempt to sew without fabric under the presser foot. When leaving the machine, even for only a short time, switch off the main switch. This is important if there are any children nearby. Display incorrect or no display When static electricity is being discharged some segments of the display will fail. The contrast on the display may be disturbed when the machine is cleaned or is transported (display is illegible or dark) Switch off the machine on completion of the sewing operation and then turn it back on again after approx. 10 seconds. All segments must appear again on the display. Select the desired stitch again. Set the contrast using the contrast control. :4 115