Pfaff tipmatic 6110 Owner's Manual - Page 78
operation.
View all Pfaff tipmatic 6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Bias tape binder Binding with bias tape is a very easy method of giving fabric edges a smooth and neat appearance. For this you need unfolded bias tape about an inch wide. - Remove the foot holder with sewing foot and screw on the binder. - Cut the beginning of the bias tape at a dia gonal. - Push the tape into the scroll of the binder and pull it out to the back. - Adjust the binder so that the needle enters at about 1/16 from the folded edge of the bias tape, or adjust the needle position. Stitch about an inch or so along the bias tape before you insert the edge to be bound into the slot of the binder. The raw edge must be placed between the bias tape edges. During sewing, the bias tape will enclose the raw edge automatically. TIP: You can obtain an additional effect by using zigzag stitch or a fancy stitch. Multistitch gathering foot This is a really classic sewing footi You can make closely or widely spaced pleats as if by magic. The multistitch gathering foot can be used in three different ways: 1 Folding the fabric in pleats. 2. Folding the fabric in pleats and sewing them on in one operation. 3. Folding the fabric in pleats, sewing them on and sewing on lace at the same time. When you buy the multistitch gathering foot from your PFAFF dealer, full operating instructions are included. 77