Pfaff tipmatic 6112 Owner's Manual - Page 72
line., tionD.
View all Pfaff tipmatic 6112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
DL Embroidering corners By changing dense zigzag the stitch width during sewing of stitches you can embroider cor ners with 45 degree angles. - Set needle thread tension select zigzag stitch G. set to "buttonhole", stitch length to ,,buttonhole" and stitch width 5 mm. Select the outermost right needle posi - tion (J and embroider a straight line. Embroider corner: - After the needle has penetrated the material to the right, reduce the stitch width using the width knob (34) by 0.5 mm to 4.5 mm. Sew a stitch. - Reduce the width once again by 0.5 mm and sew a stitch. Continue in this manner until the stitch width is 0.5 mm. - Turn the handwheel towards you until the needle penetrates the material. Turn the material 90 degrees and sew a stitch. Increase the width by 0.5 mm to 1.0 mm. - Sew one stitch. Increase the width by 0.5 mm again and - sew one stitch. Continue in this manner until the initial width is achieved. Now embroider a straight line. If the corner is to direction, use the continue in the opposite outermost left needle posi tionD. Decorative buttonhole TtShrhoainidlsecitebsioeuynatotamuoln,dlhitenhotgeeleermrbiiuesitnatbeoubnttehhtoaoeunltewhifociudlaletnha(lshoteeafervtnehpaeataigvbweeui4dttot7toh)tn.hoef up to 10 mm. Sew two buttonhole seams about 1 mm - apart, using the dense zigzag stitch (Pro gram G, stitch width 3 - 5 l mm). The needle thread tension is set tcl,,buttonhole" - Select the right needle position and sew over both ends of the buttonhole seam witt' a triangle. To do this, turn the stitch width knob (34) during sewing constantly from 0 to 5 i and back to 0. The top of the trian gle should meet the midde of both button hole seams. 68