Philips 107P2098 User manual (English) - Page 55

Adjust Moire to zero. Refer to the Adjust Moire item in On Screen

Get Philips 107P2098 PDF manuals and user guides View all Philips 107P2098 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Troubleshooting No Picture (Power LED is green) The screen says "CONTROL MENU IS LOCKED" when you press the OK knob Picture is too large or too small Edges of the picture are not square Color appears blotchy Missing one or more colors Dim Picture Picture has double image Picture is not sharp Unstable picture q Make sure the Brightness and Contrast controls are set correctly. q Make sure the monitor cable is properly connected to your computer. q Check to see if the monitor cable has bent pins. q Press the OK knob and hold for around 15 seconds to release the lock. q Adjust the Horizontal Size and/or Vertical Size. Refer to the On Screen Display chapter for details. q Refer to the Adjust Shape item in On Screen Display chapter for details. q Remove any nearby magnetic objects. q "Degauss" your monitor. Refer to the Degauss item in On Screen Display chapter for details. q Face the monitor toward the East for the best picture quality. q Make sure the monitor cable is properly connected to your computer. q "Degauss" your monitor. Refer to the Degauss item in On Screen Display chapter for details. q Check to see if the monitor cable has bent pins. q Check the Color Temperature. Refer to the Color Temperature item in On Screen Display chapter for details. q Make sure the Brightness and Contrast controls are set correctly. q "Degauss" your monitor. Refer to the Degauss item in On Screen Display chapter for details. q Eliminate the use of extension cables and/or video switch box. q Adjust Moire to zero. Refer to the Adjust Moire item in On Screen Display chapter for details. q Low down the Contrast and/or Brightness level. q Adjust Moire to zero. Refer to the Adjust Moire item in On Screen Display chapter for details. q "Degauss" your monitor. Refer to the Degauss item in On Screen Display chapter for details. q Increase the refresh rate of video signal at least to 75Hz. Refer to the Quick Start Guide or contact your computer vender for details. q Adjust Moire to zero. Refer to the Adjust Moire item in On Screen Display chapter for details. For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor. file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/107P/SAFETY/saf_troub.htm (2 of 3) [8/29/2001 2:56:42 PM]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
No Picture
(Power LED is green)
Make sure the Brightness and Contrast controls are set correctly.
●
Make sure the monitor cable is properly connected to your
computer.
●
Check to see if the monitor cable has bent pins.
●
The screen says
"CONTROL MENU IS
LOCKED" when you
press the OK knob
Press the OK knob and hold for around 15 seconds to release
the lock.
●
Picture is too large or too
small
Adjust the Horizontal Size and/or Vertical Size. Refer to the On
Screen Display chapter for details.
●
Edges of the picture are
not square
Refer to the Adjust Shape item in On Screen Display chapter for
details.
●
Color appears blotchy
Remove any nearby magnetic objects.
●
"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.
●
Face the monitor toward the East for the best picture quality.
●
Missing one or more
colors
Make sure the monitor cable is properly connected to your
computer.
●
"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.
●
Check to see if the monitor cable has bent pins.
●
Check the Color Temperature. Refer to the Color Temperature
item in On Screen Display chapter for details.
●
Dim Picture
Make sure the Brightness and Contrast controls are set correctly.
●
"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.
●
Picture has double image
Eliminate the use of extension cables and/or video switch box.
●
Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.
●
Picture is not sharp
Low down the Contrast and/or Brightness level.
●
Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.
●
"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.
●
Unstable picture
Increase the refresh rate of video signal at least to 75Hz. Refer to
the Quick Start Guide or contact your computer vender for
details.
●
Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.
●
For further assistance, refer to the
Consumer Information Centers
list to contact your local Philips
distributor.
Troubleshooting
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/107P/SAFETY/saf_troub.htm (2 of 3) [8/29/2001 2:56:42 PM]