Philips 28PFL4909 User manual - Page 31

Mode selection PC HDTV to Turn Off image enhancement features which makes the TV to act purely as a monitor to enable image enhancement features to improve picture quality Auto adjustment to adjust the Horizontal / Vertical position, Clock and Phase of the PC screen automatically J Cursor Cursor K Clock Phase to Decrease setting value to Increase setting value Horizontal position to move PC screen left to move PC screen right Vertical position to move PC screen down to move PC screen up You can set a Particular Picture Quality using Advanced settings. Auto picture Color alignment Mode Backlight Noise reduction Auto Contrast *1Light sensor On Brightness Black stretch Medium Color Dynamic contrast Maximum Tint Gamma Sharpness *2Perfect Motion Rate Off Advanced settings MPEG artifact reduction Medium Color alignment Noise reduction Light sensor *1 Black stretch Dynamic contrast Mode to set the color temperature to Personal, Cool, Normal and Warm. When you adjust the following settings, Personal will be set automatically. J Cursor Cursor K Red gain to Decrease Red Contrast to Increase Red Contrast Green gain to Decrease Green Contrast to Increase Green Contrast Blue gain to Decrease Blue Contrast to Increase Blue Contrast Red offset Green offset to Decrease Red Brightness to Decrease Green Brightness to Increase Red Brightness to Increase Green Brightness Blue offset to Decrease Blue Brightness to Increase Blue Brightness to select the desired setting, then press OK (Off, Minimum, Medium, Maximum and Auto) Off to set Light sensor to Off to adjust backlight for the best picture On quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room to select the desired setting, then press OK (Off, Minimum, Medium and Maximum) to select the desired setting, then press OK (Off, Minimum, Medium and Maximum) 31 .English Gamma Perfect Motion Rate (or 120 PMR)*2 MPEG artifact reduction J Cursor Cursor K to adjust the gamma encoding of images Off to set Perfect Motion Rate (or 120 PMR)*2 to Off On to make the video appear smooth to select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Color Off enhancement On to set color enhancement to Off to make colors more vivid and bright to select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta) J Cursor Cursor K Custom color management Tint Saturation to rotate only selected color tint in clockwise direction to decrease color with only selected color to rotate only selected color tint in counterclockwise direction to increase color with only selected color Film mode Brightness Off Auto to decrease to increase brightness with brightness with only selected color only selected color to set film mode to Off to optimize the picture recorded by the original film Note(s) ● Mode selection is available only if - the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3. - the connected HDMI device is outputting a video signal. ● Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Light sensor*1 is set to On. Please ensure the room lighting is stable and the light sensor is not blocked. *1 Not available for 32PFL4909, 32PFL4609, 28PFL4909, 28PFL4609. *2 For 55PFL4909, 55PFL4609, 50PFL4909, 49PFL4909, 49PFL4609, 43PFL4909, 43PFL4609, 40PFL4909, 40PFL4609, 32PFL4909, 32PFL4609, 28PFL4909 and 28PFL4609, 120 PMR will be displayed instead of Perfect Motion Rate. Continued on next page.