Philips 28PFL4909 User manual - Page 32

Sound Before you begin: You must set Home in Location. L p. 38 Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode. 1 Press Q (MENU) and use H I J K to select Setup then press OK. 2 Use H I to select Sound, then press OK. Settings assistant Auto sound Picture Equalizer Sound Balance Features DTS TruSurround Installation Auto volume leveling Software TV speakers Headphone volume Digital output format Personal Start now Off Off On PCM 3 Use H I J K to select the item you want to adjust, then press OK. The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available. Auto sound to select the desired Setting, then press OK. (Personal, Standard, Vivid, Sports, Movie, Music and News) When you adjust the following settings (Equalizer, DTS TruSurround and Auto volume leveling), Personal sound will be set automatically. Adjust the tonal quality for each frequency. J Cursor Cursor K Equalizer to select the specific frequency using H I, and use J K to Adjust the Level, then press OK. Adjust the speakers to suit your listening preference. Balance J Cursor Cursor K Adjusts the balance of the Right and Left speakers to Best suit your listening position. Digital TV Operation You can select the Audio language while your TV is receiving the Digital broadcasting. Digital audio language to select the language according to your preference. (It differs depending on the program.) Cable / NTSC (Analog) TV Operation You can select Main or SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program). (It differs depending on the program.) Alternate audio Main to output main-audio SAP to output second-audio program 32 .English Cable / NTSC (Analog) TV Operation When you set to Main in Alternate audio above, you can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multichannel television sound). Mono/Stereo Mono Stereo to Output Mono-audio. to Output Stereo-audio. This selects Sound modes for more Spatial or Surround sound reproduction. DTS TruSurround Off On to set DTS TruSurround™ to Off to set DTS TruSurround™ to On This function keeps a constant Loudness differential between the TV Commercials and the Programs. Auto volume leveling Off to Remove the Auto volume leveling to Reduce Volume Differences On between the TV Commercials and the Programs You can select the Audio Output from the unit's speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit's remote control. Make sure Master EasyLink is set to On. L p. 39 Off No Output Sound from the Unit's Speakers TV speakers On Speakers EasyLink to Output Sound from the Unit's Speakers to control Audio Output from your connected EasyLink Compliant Devices with VOL + / - by using this Unit's remote control. Adjust Headphone volume. Headphone volume J Cursor Cursor K to Decrease or Increase volume You can set the Digital Audio output format from SPDIF/ARC. Digital output format PCM Bitstream to Output PCM format. to Output Audio in its native format as Bitstream to connected Audio receiver. If a Channel or Input device is too loud or too soft, navigate to that Channel or Input device. J Cursor Cursor K Delta volume to set a Negative Delta volume level as per your personal preferences to set a Positive Delta volume level as per your personal preferences Note(s) ● Alternate audio and Mono/Stereo are not available when you watching TV programs with a cable box or satellite set-top box connected through an HDMI cable or Component / Composite Video cables. Continued on next page.