Philips 32PFL5332D User manual - Page 31

English Française 4 Video Camera/Games Console to TV USB C Source Button Using Composite Audio/Video Input Connect the video cable (yellow) from the video output on camera (or other device) to the video input (yellow) located on the side of TV. OR Connect S-video cable to S-video input on side of TV and to the output. Connect audio cables (red/white) from audio outputs on device to audio inputs (red/white) on the side of the TV. Tip: For mono devices, connect only white audio cable from device's audio output to white audio input on the side of TV. Turn on the TV and the device. Press the SOURCE button on the remote control until SIDE appears on TV screen. Press PLAY on the device to verify connection. Note: Interference will occur when S-video and Composite audio/video are connected. Side connections - USB/Headphone USB Headphone & Insert the plug into the headphone socket L as shown. é Press the MUTE button on the remote control to switch off the internal loudspeakers of the TV. The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack. In the Sound menu select Headphone volume to adjust the headphone volume. Viewing content from a USB device Inserting a USB device Note: USB devices are not supplied with this TV. Insert a USB device in the USB connector at the side of the TV. When a USB device is inserted, the Multimedia browser menu is displayed automatically, see further. Removing the USB device & First switch off the menu. To do so, navigate to the Multimedia browser menu and press the MENU button to exit the menu. é Remove the USB device. Digital Surround receiver Back of TV AUDIO OUT (DIGITAL) AUDIO OUT (DIGITAL) HDMI 2 CABLE / ANTENNA HDMI 1 Connect a Digital MultiChannel Surround receiver to the AUDIO OUT (DIGITAL) connector at the bottom of the TV. entry 2005 side+usb.eps The TV can output Digital audio via the AUDIO OUT (DIGITAL) connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV's AUDIO OUT (DIGITAL). See Connect Accessory Devices, p. 22. Español 23