Philips AT895 User manual - Page 19
Press the Razor Head Release Button
View all Philips AT895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH 19 1 C 2 Always turn razor OFF, unplug from outlet and remove power cord from razor. Press the Razor Head Release Button to open the Razor Head Assembly. C 3 Clean inside razor heads and hair chamber by running under hot water. C 4 Clean outside of Razor Head Assembly by running under hot water. 5 Close the Razor Head Assembly and shake off excess water. Be careful not to hit the shaving unit against anything while shaking off excess water. 6 Open Razor Head Assembly again and leave open to air dry. NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads. ◗ If you used foam or gel to shave, make sure to rinse all of it off to prevent residue build-up from clogging razor heads.
ENGLISH
1
Always turn razor OFF, unplug from outlet
and remove power cord from razor.
C
2
Press the Razor Head Release Button to
open the Razor Head Assembly.
C
3
Clean inside razor heads and hair chamber
by running under hot water.
C
4
Clean outside of Razor Head Assembly by
running under hot water.
5
Close the Razor Head Assembly and shake
off excess water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
6
Open Razor Head Assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
w
If you used foam or gel to shave, make sure to
rinse all of it off to prevent residue build-up
from clogging razor heads.
19