Philips AT895 User manual - Page 24
then close the shaving unit 2.
![]() |
View all Philips AT895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 ENGLISH C 5 Remove the razor heads and place the new razor heads in the shaving unit. Make sure that the two pointy edges of the head fit exactly into the recesses. 6 Replace the frame and turn the lock clockwise until it locks into place. C 7 Insert the notch of the shaving unit into 1 the slot in the top of the razor (1) and 2 then close the shaving unit (2). C 8 Press and hold the on/off button for at least 5 seconds to reset.The orange razor 5 sec. head replacement indicator symbol will go out. NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked. This razor has no other user-serviceable parts. For assistance call 1-800-243-3050.
![](/manual_guide/products/phillips-at83041-user-manual-9000e4b/24.png)
ENGLISH
C
5
Remove the razor heads and place the
new razor heads in the shaving unit.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
6
Replace the frame and turn the lock
clockwise until it locks into place.
C
7
Insert the notch of the shaving unit into
the slot in the top of the razor (1) and
then close the shaving unit (2).
C
8
Press and hold the on/off button for at
least 5 seconds to reset. The orange razor
head replacement indicator symbol will go
out.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
24
1
2
5 sec.