Philips CCB132AT99 User manual - Page 11

Automatic Channel Setup (cont'd) 11 Adding/Deleting Channels 1 Press the MENU button. 2,4 TO ADJUST PRESS { / B CH123 > CHANNEL SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM SAVED 2 Press the PLAY/o button or the STOP/p button to select 1 CHANNEL. TO ADJUST PRESS { / B CH123 > CHANNEL SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM SAVED POWER SLEEP/WAKE UP REW PLAY STOP F.FWD MENU STATUS/EXIT CLEAR 1 2 3 4 5 6 CH. 7 8 9 SPEED 0 ALT. CH MEMORY PAUSE/STILL VOL. REC/OTR TRACKING MUTE 5 3 3 Press the CH(annel) m/n button to select the channel you want to add or delete. TO ADJUST PRESS { / B CH23 > CHANNEL SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM SAVED 4 Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel). Repeat steps 3-4 to add or delete other channels. 5 Press the STATUS/EXIT button. Programming of the channel you added or deleted will appear. Helpful Hint • To review the channels memorized by the TV/VCR, follow these steps. 1) Press the MENU button. 2) Press the PLAY/v button or the STOP/w button to select PRIM. SETUP. Press the F.FWD/B button. 3) Press the PLAY/v button or the STOP/w button to select CH MEMORY REVIEW. Press the F.FWD/B button. A list of programmed channels will appear on the screen. 4) If all the programmed channels don't fit on the screen, press the F.FWD/B button. If you do not press the F.FWD/B button within 10 seconds, the remaining channels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/{ button to see the previous screen of channels. 5) Press the STATUS/EXIT button once or twice.