Philips CCB132AT99 User manual - Page 35

Timer Recording (cont'd) 35 Checking or Clearing Timer Recordings 1 With the TV/VCR on, press the MENU button. 2 Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F.FWD/B button. 3 Press the PLAY/v button or the STOP/w button to select PROGRAM REVIEW, then press the F.FWD/B button. The timer recording information for the program in the lowest numbered position will appear on the screen. If no timer recordings are programmed, nothing will happen when you select PROGRAM REVIEW and press the F.FWD/B button. 4 Press the F.FWD/B button to display information about the next programmed timer recording. (If you do not press a button within 10 seconds, information about the next programmed timer recording will appear.) This will continue until all positions have been displayed. Then, the menu will disappear. You can exit the Program Review at any time by pressing the STATUS/EXIT button. 5 To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed. 6 Repeat steps 1 - 4 to make sure you have cleared the correct position. 2-4 POWER SLEEP/WAKE UP 1 REW PLAY STOP F.FWD MENU STATUS/EXIT CLEAR 1 2 3 4 5 6 CH. 7 8 9 SPEED 0 ALT. CH MEMORY PAUSE/STILL VOL. REC/OTR TRACKING MUTE 5 Helpful Hints • With ShowGuard, you don't have to worry about losing your timer recordings. If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.