Philips CD1811R User manual - Page 23

Register the handsets You can register additional handsets to the base station.The base station can register up to 4 handsets. Auto registration Place the unregistered handset on the base station. »» The handset detects the base station and start to register automatically. »» Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset. Manual registration If auto registration fails, register your handset manually to the base station. 1 Press MENU/OK on the handset. 2 Select [SERVICES] > [REGISTER], then press MENU/OK to confirm. 3 Press and hold on the base station for 5 seconds. 4 Enter the system PIN. Press REDIAL/C to make corrections. 5 Press MENU/OK to confirm the PIN. »» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset. Note •• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails. Note •• The preset PIN is 0000. No change can be made on it. Unregister the handsets 1 If two handsets share the same base station, you can unregister a handset with another handset. 2 Press MENU/OK. 3 Select [SERVICES] > [UNREGISTER], then press MENU/OK to confirm. 4 Enter the system PIN. (The preset PIN is 0000). Press REDIAL/C to remove the number. 5 Select the handset number to be unregistered. 6 Press MENU/OK to confirm. »» The handset is unregistered. Tip •• The handset number displays beside the handset name in standby mode. Restore default settings You can reset your phone settings to the original factory settings. 1 Press MENU/OK. 2 Select [SERVICES] > [RESET], then press MENU/OK to confirm. »» The handset displays a confirmation request. 3 Press MENU/OK to confirm. »» All settings are reset. »» The welcome screen displays. Tip •• For more information about the default settings, see the section on Default settings. 22 EN