Philips CD1811R User manual - Page 27
Remote access commands, Behavior of the LED display on the, base station
View all Philips CD1811R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3 Enter your PIN code. »» You now have access to your answering machine, and you can now listen to the new messages. Note •• You have 2 chances to enter the correct PIN code before your phone hangs up. 4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions. Note •• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds. Remote access commands Key Function 1 Repeat the current or listen to the previous message. 2 Listen to messages. 3 Skip to the next message. 6 Delete the current message. 7 Switch the answering machine on. (not available when you listen to the messages). 8 Stop listening to the message. 9 Switch the answering machine off. (not available when you listen to the messages). Behavior of the LED display on the base station The table below shows you the current status with different LED display behavior on the base station. LED display Steady on Flashing Flashing (Fast) Flashing Flashing Flashing Steady on Steady on Flashing (Fast) Flashing Message status There is new message and the memory is not full. There is a new message and the memory is not full. There is no new message and the memory is full. Recording an incoming message/announcement. Message playback. Remote access/listen to messages from the handset. The handset is switched on. Enter the paging mode Enter the registration mode There is an incoming call. 26 EN