Philips DVP3980 User manual - Page 34
Audio Setup
UPC - 609585171893
View all Philips DVP3980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English Setup Menu Options (continued) Audio Setup Page (underlined options are the factory default settings) Analog Output This setting is only required if you have connected the audio output of this unit to a stereo device or TV using the analog output jack. { LT/RT } { Stereo } { V SURR } - The connected device has a built-in Dolby Pro Logic decoder. It can deliver the surround sound through the two speakers. - The connected device can only output stereo audio through two speakers. - For virtual surround sound effects. Digital Audio Setup This setting is only required if you have connected the audio output of this unit to an amplifier/receiver using the digital output jack. { Digital Output } - { Off } Disable digital audio output. Select this if you are using the analog audio jacks to connect this unit to a TV or Stereo system. { ALL } The connected device supports multichannel audio formats. The digital audio format will be output as on disc. { PCM Only } The connected device does not support multi-channel formats. All audio signals are downmixed to PCM format (2-channel). { LPCM Output } - { 48 K } Select this to play disc recorded at sampling rate of 48kHz. { 96 K } Enable 96 kHz output on digital audio if the amplifier/receiver is compatible with high sampling rate audio (88.2 / 96 kHz). However, if the sound output is distorted or there is no sound, change the setting to '48 kHz'. Note: LPCM Output can only be selected when { PCM Only } is activated. The higher the sampling rate, the better the sound quality. 34