Philips FWC788 User manual - Page 10

English Preparations FM Antenna 1 2 ¶ For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal. C Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS (FRONT) terminals, right speaker to "R" and left speaker to "L", colored (marked) wire to "+" and black (unmarked) wire to "-". 1 2 ¶ Clip the stripped portion of the speaker wire as shown. Notes: - For optimal sound performance, use the supplied speakers. - Do not connect more than one speaker to any one pair of +/- speaker terminals. - Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual. Connecting other equipment to your system Connect the audio left and right OUT terminals of a TV,VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals. Notes: - Do not connect equipment to both the LINE OUT and AUX/CDR IN terminals at the same time. Otherwise, noise will be generated and malfunction might occur. - If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX/CDR IN left terminal. Alternatively, you can use a "single to double" cinch cable (still be mono sound). Digital Out Connection Connect this digital output when recording on any audio equipment with digital input (CD Recorder, Digital Audio Tape [DAT] deck, Digital to Analog Converter and Digital Signal Processor, for example). Use a cinch cable to connect the DIGITAL OUT terminal to the digital input terminal of the equipment. Inserting batteries into the Remote Control Insert two batteries (Type R06 or AA) into the remote control with the correct polarity as indicated by the + and - symbols inside the battery compartment. 2 1 Optional Connections The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details. Line Out Connection Connect this output to any analog audio equipment for playback or recording (CD recorder, tape recorder or amplifier for example). Use a cinch cable to connect the LINE OUT terminals to the analog audio in terminals of the equipment. CAUTION! - Remove batteries if they are exhausted or not to be used for a long time. - Do not use old and new or different types of batteries in combination. - Batteries contain chemical substances, so they should be disposed off properly. 10 pg 001-029/C788/37-Eng 10 12/11/01, 5:32 PM 3139 115 21181