Philips FWM779 User manual - Page 23

English Disc Operations Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. IMPORTANT! It is only possible to program from the current selected disc tray. 1 MP3 USB PC LINK AUX/GAME 2 VOL 4 DSC VAC WOOX LEVEL 6 7 35 1 Load the desired discs on the disc trays (refer to "Loading discs"). 2 Press CD or one of the CD 1~5 buttons to select a disc. 3 Press PROGRAM (PROG) to start programming. ➜ PROG starts flashing. 4 Press í or ë repeatedly to select the desired track. ● For MP3 disc, press à / á (ALBUM 43) and í / ë (TITLE -+) to select the desired album and title for programming. 5 Press PROGRAM (PROG) to store. ● Repeat steps 4-5 to select other tracks. ➜ If you attempt to program more than 99 tracks,"PROGRAM FULL" is displayed. 6 To start program play, press ÉÅ. 7 To stop playback or to end programming, press Ç once. ➜ PROG stays and the programming mode remains active. Notes: - If the total playing time has reached 100 minutes or one of the programmed tracks has a number greater than 30, "-:-" is displayed instead of the total playing time. - The system will exit the programming mode if no button is pressed within 20 seconds. Checking the programme 1 Stop playback and press í or ë repeatedly. 2 Press Ç to exit. OR Press ÉÅto start playback from the current programmed track Clearing the programme ● Stop playback, and then press Ç to clear the programme. OR Press the OPEN • CLOSE 0 button of the disc tray. ➜ PROG disappears and "PROGRAM CLEARED" is displayed. Note: - The program will be erased if the system is disconnected from the power supply or you switch to another source mode. 23