Philips FWM779 User manual - Page 25
Timer Operations
View all Philips FWM779 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English Timer Operations Timer setting The system can switch on to CD,TUNER or USB PC LINK mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! - Before setting the timer, ensure that the clock is set correctly. - The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level. 3 (CD / TUNER / USB PC LINK) 4 (00:00 / 12:00AM) 2 4 (00:00 / 12:00AM) 125 ● At the preset time, the selected sound source will be played for 30 minutes before it switches to Eco Power standby mode (if no button is being pressed within the time frame). ➜ CD - playing the first track of the last selected disc. If the last selected disc tray is empty, it will switch to the next available disc. If all the disc trays are not available, it will switch to Tuner mode. ➜ TUNER - playing the last tuned radio station. ➜ USB PC LINK - playing the last selected playlist. If the connection fails, it will switch to Tuner mode. Refer to "USB PC Link" for proper connection and setup before use. Activating/deactivating the timer ● Press TIMER ON/OFF on the remote control to turn off the timer or turn on to the last setting again. ➜ If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in the standby mode. ➜ If deactivated,"CANCEL" is displayed. 1 Press and hold CLK/TIMER (or CLOCK • TIMER on main unit) until "SELECT CLOCK OR TIMER" is displayed. 2 Press ë to change the display to "TIMER" and press CLK /TIMER again to confirm. 3 Press CD or TUNER or USB PC LINK to select the wake-up source. ➜ The selected source will be lighted while other available sources are flashing. 4 Press à or á (for hours) and í or ë (for minutes) repeatedly to set the wake-up time. 5 Press CLK/TIMER to store the setting. ➜ The timer will always be switched on once it has been set. ➜ icon remains on the display. It indicates the timer is activated. Notes: - The system will exit the timer setting mode if no button is pressed within 90 seconds. - The USB timer does not function when the computer is in the standby mode. 25