Philips HTD3514 User manual - Page 12
Set up speakers, Set up EasyLink (HDMI-CEC control), Enable EasyLink, EasyLink controls
View all Philips HTD3514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Set up speakers Set up the speakers manually to experience customized surround sound. Before you start Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater. 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [Audio] > [Speaker Setup]. 4 Press the Navigation buttons and OK to select and change: • [Speakers Volume]: Set the volume level of each speaker. • [Speakers Delay]: Set the delay time for speakers which are placed closer to the seating position in order to obtain equal audio transmission from all the speakers. Set up EasyLink (HDMI-CEC control) This home theater supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLinkcompliant devices that are connected through HDMI can be controlled by a single remote control. Note •• Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device. •• Philips does not guarantee 100% interoperability with all HDMI-CEC devices. Before you start • Connect your home theater to the HDMI- CEC compliant device through HDMI connection. 10 EN • Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater. Enable EasyLink 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [Video], and then press OK. 4 Select [HDMI Setup] > [EasyLink Setup] > [EasyLink] > [On]. 5 On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices. • On your TV, set the audio output to 'Amplifier' (instead of TV speakers). For details, see the TV user manual. EasyLink controls With EasyLink, you can control your home theater,TV, and other connected HDMI-CEC compliant devices with a single remote control. • [One Touch Play] (One-touch play): If one- touch play is enabled, press (StandbyOn) on the remote control of your home theater to wake up the TV from standby. • [One Touch Standby] (One-touch standby): If one-touch standby is enabled, your home theater can switch to standby with the remote control of the TV or other HDMI-CEC devices. • [Sys Audio Control] (System audio control): If system audio control is enabled, the audio of the connected device is output through your home theater speakers automatically when you play the device. • [Audio Mapping] (Audio input mapping):If system audio control does not work, map the connected device to the correct audio input connector on your home theater. (see 'Set up the audio' on page 11)