Philips HTS3566D User manual - Page 40

English Setup Menu Options (continued) Audio Setup (underlined options are the factory default settings) Speakers Volume Access the speaker's level setup menu. Use keys to adjust the volume level for each connected speaker between -6dB to +6dB. See 'Getting Started - Setting the speakers' channels' for details. Speakers Delay Access the speaker's distance setup menu. Use keys to set the delay times for the center and rear speakers based on the listening position and distance. See 'Getting Started - Setting the speakers' channels' for details. Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. HDMI Audio This setting is only required if you are using the HDMI OUT jack to connect your TV or other display device (see 'Option 4: Connecting to a HDMI-compatible TV'.) { Off } - Turn off the HDMI audio output. You can still enjoy the sound output through the speaker system. { All } - The HDMI audio output will be same as the audio stream being played back. In the case when the playback audio format is not supported, the audio output will be changed to PCM (Pulse Code Modulation) automatically. Notes: - It may take a while for this unit and the input device to communicate and initialize. - It is not possible to listen to SACDs or copy-controlled DVDAudio CPPM (Content Protection for Playable Media) sources using the HDMI connection. 40 1_hts3565-66D_37_eng2_final813.i40 40 2008-03-27 3:12:06 PM