Philips LFH0617 User manual - Page 7

Get started - voice tracer

Page 7 highlights

4 Get started Insert the battery 1 Slide open the battery cover. 2 Insert the battery as indicated. Make sure the polarity is correct. Power on/off 1 To power on, press the f button until the display shows a short animation [ ]. 2 To power off, press the f button while the recorder is stopped until the display shows BYE. AAA Keypad lock (HOLD function) 3 Close the cover again. D Notes • Remove the battery if you will not be using the Voice Tracer for an extended period. The Voice Tracer could be damaged by a leaking battery. • If the Voice Tracer does not function properly, remove the battery and re-insert it again. • Stop the Voice Tracer before replacing the battery. Removing the battery while the recorder is in use may corrupt the file. • When the battery is nearly empty, the battery indicator blinks. HOLD 1 Slide the HOLD switch up into the Hold position to lock the keypad of the recorder. • The display briefly shows 'On Hold' and turns off. 2 Slide the HOLD switch down to the Off position to disengage the keypad lock.  Table of contents Get started 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Get started
7
Table of contents
4
Get started
Insert the battery
1
Slide open the battery cover.
2
Insert the battery as indicated. Make sure the polarity is correct.
3
Close the cover again.
D
Notes
Remove the battery if you will not be using the Voice Tracer for an
extended period. The Voice Tracer could be damaged by a leaking
battery.
If the Voice Tracer does not function properly, remove the battery
and re-insert it again.
Stop the Voice Tracer before replacing the battery. Removing the
battery while the recorder is in use may corrupt the file.
When the battery is nearly empty, the battery indicator blinks.
Power on/off
1
To power on, press the
f
button until the display shows a short
animation
[ ]
.
2
To power off, press the
f
button while the recorder is stopped
until the display shows BYE.
Keypad lock (HOLD function)
1
Slide the
HOLD
switch up into the Hold position to lock the
keypad of the recorder.
The display briefly shows ‘On Hold’ and turns off.
2
Slide the
HOLD
switch down to the Off position to disengage the
keypad lock.
AAA
HOLD