Philips MCD703 User manual - Page 28

English System Menu Options HDCD The option included in HDCD (High Definition Compatible Digital) is: "Filter". Filter Sets the audio output cutoff frequency point when playing an HDCD disc. ➜ Off, 44.1K and 88.2K. Night Mode Switches on/off analogue sound dynamic range compression. ➜ On: Audio with fully compressed dynamic range. ➜ Off: Audio with uncompressed dynamic range. Video Setup Page The options included in Video Setup page are: "Component", "TV Mode" and "Quality". ➜ S-Video: Select this if you have connected the DVD micro system to your TV using S-Video jack. TV Mode Selects interlace or P-SCAN video output mode when Ypbpr is selected. ➜ P-SCAN and Interlace. In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see page 17-18. Quality This menu helps you to set the video quality. 1 Press 3 4 to highlight "Quality". 2 Press 2 or OK to enter Video Quality Setup. The options included in Video Quality Setup page are:"Sharpness", "Brightness","Contrast", "Gamma", "Hue", "Saturation" and "Luma Delay". Component Sets the video output according to your video connection.This setting is not required if you are using the VIDEO OUTPUT jack (yellow) to connect the DVD micro system to your TV. ➜ Ypbpr: Select this if you have connected the DVD micro system to your TV using Component video jacks. Sharpness Adjusts the sharpness level. ➜ High, Medium and Low. Brightness Adjusts the brightness level. Range: -20-+20. Contrast Adjusts the contrast level. Range: -16-+16. 28