Philips SRU5107WM User manual - Page 10
Keep updated for future, devices
UPC - 609585182332
View all Philips SRU5107WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
MUTE LIVE TV INPUT SELECT OK CBL AUX DVD POWER Example of DVD. 1 Set up the remote control for a device (in this example DVD) as described in chapter 3.2.1 'Code search by brand'. 2 Select DVD by pressing the DVD mode button for more than 1 second. • The remote control sends out the 'Select DVD' command. 3 Press and immediately release the SETUP button.Then press and immediately release the DVD mode button to select DVR. • The remote control sends out the 'Select DVR' command. Notes • This method can be applied similarly to all Combo devices (TV / DVR,TV / VCR, DVD / DVR, etc.) and is available for all device modes. • Note that this feature is not supported by all codes. 5 Keep updated for future devices 5.1 Learning commands The learning feature allows you to 'learn' the remote control functions from your original remote control. For example: you may want to use your remote control to operate the RANDOM PLAY feature from your original CD remote control. ± 1 inch 1 Press and hold the SETUP button until the red light indicator turns on, then release the button. 2 Press and release the desired mode button (TV, DVR, etc.). • The red light indicator flashes, then remains lit. 3 Press and release the LEARN button. • The red light indicator flashes, then remains lit. 4 Press and release the button on the SRU5107 that you wish to learn a new function (e.g. POWER). 5 Point both remote controls facing each other by approximately 1 inch apart (refer to chapter 5.4 'Tips on learning'). 6 Press and hold the button from which you wish to learn on the original remote control (e.g. POWER) until the red light indicator flashes once and then remains lit. • If there is a learning problem, the red light indicator flashes for three seconds and then remains lit. If this happens, repeat steps 4 to 6. 7 Repeat steps 4 to 6 for other buttons you wish to learn a new function. 8 Press and release the SETUP button when all desired remote control commands have been learned. • Code Learning is now complete. 10 EN HD VCR DVR SETUP SAT TV LEARN