Pioneer AVIC N2 Installation Manual - Page 21

Appendix Appendix Troubleshooting ➲ About troubleshooting other than description below ➞ Appendix of the Operation Manual Symptom There's no picture. The icon is displayed, and operation is not possible. The picture stops (pauses) and the unit cannot be operated. The picture is stretched, the aspect is incorrect. Rear display picture disappears. Nothing is displayed and the touch panel keys cannot use. LCD Panel knocking against your vehicle's console or dashboard. Video image appears grainy. Cause The parking brake cord is not connected. The parking brake is not applied. The operation is prohibited for the disc. The operation is not compatible with the disc's organization. Reading of data has become impossible during playback. The aspect setting is incorrect for the display. • The source disc being listened to with the product has been ejected. • The disc without a video source is playbacked. • The REAR button was pressed and REAR ON mode switched off. • There was a problem with the rear display or a faulty wiring connection, for example. • Rear View is selected on the screen. • When the shift lever is in [R], displays rear view camera images. (When "NAVI" is selected in REAR DISP menu.) The setting for the rear view camera is incorrect. The shift lever was placed in [R] when the rear view camera was not connected. Incorrect setting of angle. This happens when videos are viewed in CINEMA or ZOOM mode. Action (See) Connect a parking brake cord, and apply the parking brake. Connect a parking brake cord, and apply the parking brake. This operation is not possible. This operation is not possible. After pressing 7 once, start playback once more. Select the appropriate setting for your display. (Page 15) • Before ejecting the disc, switch the source. • Switch the source with a video source. • Press the REAR button to turn REAR ON mode on. • Check the rear display and its connection. • Select view mode other than Rear View. • Select SOURCE in REAR DISP menu.(or when you move the shift lever other than [R] position, the screen will be returned to the previous display.) Connect a rear view camera correctly. Press NAVI/AV button to return to the source display and then select the correct setting for CAMERA. ➲ About CAMERA setting ➞ Operation Manual Press ANGLE (+/-) to adjust the LCD angle. Forcibly adjusting the LCD panel by hand may damage it. Select a different mode to view videos. 19