Pioneer CDXFM687 Operation Manual - Page 20
Setting Player to Play Discs via Radio - car audio player
View all Pioneer CDXFM687 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Playing Compact Discs Setting Player to Play Discs via Radio [Page 20~21] Modulating frequencies selector This system can change the frequency at which the FM car radio receives the CD audio signals within the range of 87.9 to 90.1 MHz in 0.2 MHz increments. (The initial setting is 89.1 MHz.) If there is a strong broadcast station signal near the current frequency, radio interference may occur. If it occurs, change the frequency. Source level adjuster When you play discs, if the volume is low compared with that for FM increase the volume level. If the volume is high and there is distortion, decrease the volume level. (The initial setting is "LEVEL-4".) Pre-emphasis selector Normally, set the pre-emphasis selector to "PRE-EMP 1". (The initial setting is "PRE-EMP 1".) Play a disc. If you feel the treble is insufficient, switch the selector to "PRE-EMP 2" to boost the treble slightly. • When the selector is set to "PRE-EMP 2", the sound may distort with some car radios. In this case, switch it back to "PRE-EMP 1". 1. Hold down button for more than 2 seconds. The modulator setting or mode will be entered, and the fre- quency will be displayed. MEMO If you do nothing within the next 8 seconds, the modulator setting mode returns to the normal mode without changing the most recent settings. 20