Pioneer DEH P2900MP Owner's Manual - Page 20
Audio Adjustments, Recalling equalizer curves - no power
UPC - 012562840062
View all Pioneer DEH P2900MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Section 06 Audio Adjustments Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom EQ FLAT Flat SPR-BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting will be memorized in CUSTOM. ! When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: POWERFUL-NATURAL-VOCAL-CUSTOM -EQ FLAT-SPR-BASS Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select EQ. 2 Press c or d to select the equalizer band to adjust. EQ-L (low)-EQ-M (mid)-EQ-H (high) 3 Press a or b to adjust the level of the equalizer band. +6 to -6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. Note If you make adjustments, CUSTOM curve is updated. Fine-adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select the band for adjustment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions: Low-Mid-High 3 Press c or d to select the desired frequency. Low: 40-80-100-160 (Hz) Mid: 200-500-1k-2k (Hz) High: 3k-8k-10k-12k (Hz) 4 Press a or b to select the desired Q factor. 2N-1N-1W-2W Note If you make adjustments, CUSTOM curve is updated. 20 En