Pioneer DEH-P600UB Owner's Manual - Page 53

Available accessories Section 06 Available accessories 3 SIRIUS preset number indicator 4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected. I.R is displayed during the Instant Replay mode. 5 SIRIUS channel name Shows the channel name of broadcast channel. % Select a SIRIUS band. Press BAND. # Band can be selected from SR-1, SR-2 or SR-3. % Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.) Note It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel. Selecting a SIRIUS channel directly When using the remote control, you can select the SIRIUS channel directly by entering the desired channel number. 1 Press DIRECT. Channel number input display appears. 2 Press 0 to 9 buttons to enter the desired channel number. # You can cancel the input number by pressing CLEAR. 3 Press DIRECT. The SIRIUS channel of entered number is selected. # After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled. Switching the SIRIUS display % Press DISP to switch the SIRIUS display. Each press of DISP changes the SIRIUS display in the following order: Play time-Channel number-Channel name -Category name-Artist name-Song title/ program title-Composer name # Play time is displayed during the Instant Replay mode. Refer to Using Instant Replay function on page 56. # Play time display indicates the time inverted from the live broadcast. Play time is displayed in negative number. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. ! Six stations for each band can be stored in memory. % When you find a station that you want to store in memory press one of preset tuning buttons 1 to 6 and hold until the SIRIUS preset number stops flashing. The number you have pressed will flash in the SIRIUS preset number indicator and then remain lit. The selected station has been stored in memory. The next time you press the same preset tuning button the station is recalled from memory. # You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down. En 53