Pioneer DJM-707 Owner's Manual - Page 13

Start playback with channel fader 1 To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [CH-1] or [CH-2] position. When using the CH-1 fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [CH-1] position; when using the CH-2 fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [CH-2] position. FADER START C.F. 1 CH-1 C.F. 2 CH-2 FADER OPERATIONS Start playback with cross fader 1 To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [C.F.1] or [C.F.2] position. When using cross fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [C.F.1] position; when using the cross fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [C.F.2] position. FADER START C.F. 1 CH-1 C.F. 2 CH-2 2 Press the top panel FADER START button so that the indicator lights. When the CH-1 FADER START button is pressed, the CH-1 FADER START indicator lights. When the CH-2 FADER START button is pressed, the CH2 FADER START indicator lights. 3 Set the channel fader lever to the [0] scale mark. 4 Adjust the CD player to its cue point and set for cue point standby. 5 Begin moving the channel fader lever with the timing you wish, thereby beginning playback on the CD player. FADER START FADER START REVERSE REVERSE CH-1 FADER START CH-1 10 9 8 7 6 5 4 3 2 1 0 CH-2 10 9 8 7 6 5 4 3 2 1 0 CH-2 FADER START ÷ If the cue point has already been set, there is no need to set the CD player again for standby at the cue point. ÷ After playback has once begun, moving the channel fader lever back to the "0" scale mark will cause the CD player to return to its cue point and enter the standby mode again (back cue). 2 Press the top panel FADER START button so that the indicator lights. When the CH-1 FADER START button is pressed, the C.F.1 FADER START indicator lights. When the CH-2 FADER START button is pressed, the C.F.2 FADER START indicator lights. 3 Move the cross fader lever to the side opposite from the channel you wish to start. 4 Adjust the CD player to its cue point and set for cue point standby. 5 Begin moving the cross fader lever with the timing you wish, thereby beginning playback on the CD player. FADER START C.F.1 FADER START REVERSE 1 2 FEELING ADJ. ÷ If the cue point has already been set, there is no need to set the CD player again for standby at the cue point. ÷ If the cross fader lever is moved fully after the beginning of playback, the opposite channel's CD player will return to its cue point and enter standby there (back cue). 13