Pioneer DJM-707 Owner's Manual - Page 6

CONNECTIONS 2. Connecting Headphones (front panel) Headphones FADER REVERSE CH-1 C.F. CH-2 ON ON ON OFF OFF OFF CH-1 PROFESSIONAL 2CHANNEL MIXER DJM-707 FADER CURVE CROSS FADER 1 CROSS FADER 2 FADER CUT LAG MIN MAX FADER START C.F. 1 CH-1 C.F. 2 CH-2 PHONES CH-2 POWER 5 Headphones 5 Use to connect headphones with a 6.3 mm diameter stereo plug. 3. Output Connections Power amplifier (supporting RCA input) 6 External effector 8 L R 9 R L Power amplifier (for booth monitor) CH-2 R CD R MASTER 2 L PHONO / LINE LR PHONO SEND RETURN CH-1 LR L R L (MONO) MASTER 1 3 COLD 1 GND CD (MONO) PHONO / LINE PHONO BOOTH/ SESSION OUT SIGNAL GND LINE CH-2 PLAYER CONTROL R 2 HOT SIGNAL LINE GND L CH-1 PLAYER CONTROL MIC R L SESSION IN 7 R L p Power cord Power outlet To SESSION IN jacks of other mixer Power amplifier (supporting XLR input) External effector 6 Use a 6.3 mm monaural plug to connect the external effector's input connectors to the DJ mixer's SEND jacks. When using an effector with a monaural input, connect it to the L channel output only. The signal actually sent to the effector will represent a mix of L and R signals. Use a 6.3 mm monaural plug to connect the external effector's output connectors to the DJ mixer's RETURN jacks. When using an effector with monaural output, connect only the L channel input. The signal received from the effector will be input to both L and R channels. Master output MASTER 1 7 XLR type balanced output. 6 MASTER 2 8 RCA type unbalanced output. BOOTH/SESSION OUT 9 These jacks are provided for booth monitor output. The sound volume here is controlled by the booth monitor level dial, regardless of the setting of the MASTER LEVEL dial. When using this unit in tandem with another mixer, connect these jacks to the other mixer's session input connectors. Power cord p After completing all other connections, connect the power plug to a standard power outlet or to the auxiliary power outlet of an amplifier.