Pioneer DV-656A Owner's Manual - Page 64

08 The Initial Settings Menu Initial Settings Digital Audio Out Video Output Language Display Options Speaker Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB You can set the individual channel levels between -6dB and +6dB using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Automatic: Select Auto to start the test tone output. Initial Settings Digital Audio Out Video Output Language Display Options Speakers Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the / (cursor up/down) buttons to adjust the channel output level of the current speaker. Press (cursor left) to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen. Manual: Use the / (cursor up/down) buttons to select a speaker. Initial Settings Digital Audio Out Video Output Language Display Options Speaker Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB Press (cursor right) then use the / (cursor up/down) buttons to set the channel output level. Initial Settings Digital Audio Out Video Output Language Display Options Speaker Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB To turn the test tone on/off for an individual speaker, press (cursor right). The test tone continues playing even when you select a different speaker. Initial Settings Digital Audio Out Video Output Language Display Options Speaker Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB Press ENTER to save the settings and exit the channel level setting screen. 64 En