Pioneer DV-C505 Operating Instructions - Page 46

07 The Initial Settings Menu Using the Initial Settings menu The Initial Settings menu gives you complete control in setting up your DVD player. including audio, and video output settings. audience limitation settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. 1 Press SETUP and select 'Initial Settings' from the on-screen display. Digital Audio Out settings Digital Out • Default setting: On You only need to make this setting ifyou connected this system to an AV receiver (or other component) using one of the digital outputs. Initial Settings LIlioltal Audio Out LBtititi out son Video Output Dolby Digital Out Ott Language DTS Out Display 96 695 Pat Oct Options MPEG Out 'ej Audio Settings Play Mode Initial Settings fLi) Disc Navigator Setup Navigator 2 Select the setup category from the list on the left, then select an item from the menu list to the right. 3 Make the setting you want. Note • The language options shown in the onscreen display illustrations on the following pages may not correspond to those available in your country or region. If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Note that you can't switch on/off the optical and coaxial outputs individually. Dolby Digital Out • Default setting: Dolby Digital You only need to make this setting ifyou connected this system to an AV receiver (or other component) using one of the digital outputs. Initial Settings Digital Audio Out Vick* Output Language Display Options Digital Out loolby DWtul Out DTS Out 96 kit, PCM Out MPEG Out • Dolby Digital Dolby NW> PC11 If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital > PCM 46 En