Pioneer DV320K Operating Instructions - Page 35

Additional information Appendix 06 English Problem Check Remedy The player's power turns off automatically. Is Auto Power Off set to On? If Auto Power Off is set to On, the player's power turns off automatically if no operation is performed for over 30 minutes (page 32). Power turns on or off automati- Is KURO LINK set to On? cally. (DV-420V only) The player's power may turn on together with the power of the TV connected to the HDMI OUT terminal. If you do not want the player's power to turn on when the TV's power is turned on, set KURO LINK to Off (page 32). Input of connected TV and AV Is KURO LINK set to On? system switches automatically. (DV-420V only) The input of the TV and AV system (AV receiver or amplifier, etc.) connected to the HDMI OUT terminal may automatically switch to the player when playback starts on the player or the menu screen (Home Menu, etc.) is displayed. If you do not want the inputs of the connected TV and AV system (AV receiver or amplifier, etc.) to switch automatically, set KURO LINK to Off (page 32). Picture is not displayed. Is the video cord properly connected? Connect the cord properly, inserting the plug all the way in. Is the video cord damaged? If the video cord is damaged, replace it with a new cord. Is the input on the connected TV Switch to the proper input, referring to the or AV receiver or amplifier properly connected device's operating instructions. set? Picture is stretched, or aspect Is the aspect ratio properly set on Refer to the TV's operating instructions and ratio cannot be switched. the connected TV? set the TV's aspect ratio properly. Is TV Screen properly set? Set TV Screen properly (page 29). During playback, picture is disturbed or dark. This is not a problem with the player. This player supports Macrovision copy protection. With some TVs, the picture may not display properly when playing discs including copy prevention signals. This is not a malfunction. Are the player and TV connected via a video deck? When the player and TV are connected via a video deck, the player's analog copy protect function may cause the picture being played on the video deck not to display properly. Connect the player and TV directly. Is the TV system properly set? The factory default setting is AUTO. If the picture is distorted, switch the TV system to the one used in your country or region (NTSC or PAL) (page 43). Playback stops momentarily or Are you playing a disc that was the disc is not properly played. edited on a DVD recorder, etc.? When edited images are played, the picture may stop momentarily at points where images were combined, and the disc may not play as edited. En 35