Pioneer DV320K Operating Instructions - Page 36
DIGITAL AUDIO OUT COAXIAL, OPTICAL, DIGITAL AUDIO, OUT COAXIAL, Digital Out, Digital Audio Out,
UPC - 030326375445
View all Pioneer DV320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Appendix 06 Additional information Problem Sound is not produced or is distorted. 96 kHz/88.2 kHz digital audio signals are not output from the DIGITAL AUDIO OUT (COAXIAL/OPTICAL) terminals. Multichannel audio signals are not output. Check Is the pause, frame-by-frame forward or reverse, or slow play mode set? Are the connected devices (AV receiver or amplifier, etc.) properly set? Is the disc scratched? Is the disc dirty? Are the audio cords properly connected? Are the audio cords damaged? Is the player properly connected to the other devices (AV receiver or amplifier, etc.)? Is the other device (AV receiver or amplifier, etc.) connected to the DIGITAL AUDIO OUT (COAXIAL/ OPTICAL) terminals? Is Digital Out set to On? Is the audio output properly set on the connected AV receiver or amplifier, etc.? Is Digital Audio Out set to audio signals the AV receiver or amplifier, etc., supports? Remedy No sound is output during pause, frameby-frame forward/reverse or slow motion playback. Refer to the TV's operating instructions and check the settings (volume, input, speaker settings, etc.). Scratched discs may not play. Wipe the dirt off the disc (page 44). Connect the cord properly, inserting the plug all the way in. If the audio cord is damaged, replace it with a new cord. Check whether you are mistakenly connected to the other device's audio output terminals, etc. Check whether you are mistakenly connected to the AV receiver or amplifier's PHONO input terminals, etc. When connected to the DIGITAL AUDIO OUT (COAXIAL/OPTICAL) terminals, set Digital Out to On (page 28). Refer to the connected AV receiver or amplifier's operating instructions and check the audio signals it supports. Set Digital Audio Out according to the audio signals supported by the AV receiver or amplifier, etc. (page 28). When connected to the DIGITAL AUDIO OUT (COAXIAL/OPTICAL) terminals, set Digital Out to On (page 28). Refer to the connected AV receiver or amplifier's operating instructions and check the audio output settings. Switch the disc's audio to multichannel audio using the menu screen or AUDIO. Refer to the connected AV receiver or amplifier's operating instructions and check the audio signals it supports. Set Digital Audio Out according to the audio signals supported by the AV receiver or amplifier, etc. (page 28). 36 En