Pioneer FH-S701BS Owner s Manual - Page 32
Operation modes, Adjusting the cut-off frequency value and the slope, value
View all Pioneer FH-S701BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English Operation modes This unit features two operation modes: network mode and standard mode. You can switch between modes as desired (page 11). Network mode You can create a 2-way + SW multi-amp and multi-speaker system with high range speaker, middle range speaker and subwoofer for reproduction of high, middle and low frequencies (bands). Standard mode You can create a 4-speaker system with front and rear speakers or front speakers and subwoofers, or a 6-speaker system with front and rear speakers and subwoofers. Adjusting the cut-off frequency value and the slope value You can adjust the cut-off frequency value and the slope value of each speaker. The following speakers can be adjusted. Network mode: [HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF] (middle-range speaker LPF), [SUBWOOFER] Standard mode: [FRONT], [REAR], [SUBWOOFER] NOTE [SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 37). 1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [AUDIO], then press to confirm. 3 Turn the M.C. dial to select [CROSSOVER], then press to confirm. 4 Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to confirm. 5 Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter), then press to confirm. 6 Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit (filter) selected in step 4, then press to confirm. Network mode: [1.25K] to [12.5K] (if you choose [HIGH] or [MID LPF]) - 32 -