Pioneer FH-S701BS Owner s Manual - Page 51
Additional Information
View all Pioneer FH-S701BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Additional Information English Troubleshooting The display automatically returns to the normal display. → No operations have been made for about 30 seconds. - Perform an operation. The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. - Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected. - Select another repeat play range. The sound is intermittent. → You are using a device, such as a cellular phone, that may cause audible interference. - Move electrical devices that may be causing the interference away from the unit. The sound from the Bluetooth audio source is not played back. → There is a call in progress on a Bluetooth-connected cellular phone. - The sound will be played back when the call is terminated. → A Bluetooth-connected cellular phone is currently being operated. - Stop using the cellular phone. → The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone. - Make a Bluetooth connection between the unit and the cellular phone again. Error messages Common AMP ERROR → This unit fails to operate or the speaker connection is incorrect. → The protective circuit is activated. - Check the speaker connection. - Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance. NO XXXX (NO TITLE, for example) → There is no embedded text information. - Switch the display or play another track/file. CD player ERROR-07, 11, 12, 17, 30 → The disc is dirty. - Clean the disc. → The disc is scratched. - Replace the disc. ERROR-07, 10, 11, 12, 15, 17, 30, A0 → There is an electrical or mechanical error. - Turn the ignition switch OFF and back to ON, then back to the CD player. ERROR-15 → The inserted disc is blank. - Replace the disc. ERROR-23 → Unsupported CD format. - Replace the disc. - 51 -