Pioneer HTP-710 Operating Instructions - Page 31

English Français Deutsch Italiano Español Nederlands Speaker Setup (HTP-SB510) 01 Additional notes on speaker placement • Install the speaker below the TV, in the center position. • Televisions supporting 3D display transmit signals to the 3D glasses worn by the viewer. In order to view 3D images, consult the television's Operating Instructions and install the speaker so that it does not block the television's 3D signal transmitter. Precautions: • Do not rest the speaker on the TV itself. • Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure. • The speaker and subwoofer are not magnetically shielded and so should not be placed near a TV or monitor. Magnetic storage media (such as floppy discs and tape or video cassettes) should also not be kept close to the speaker and subwoofer. • Do not attach the subwoofer to a wall or ceiling. They may fall off and cause injury. For Enhanced Sound Quality A home theater system can be easily constructed using just the speaker and the subwoofer of this set, but by adding optional SSB5R speaker systems, you can enjoy genuine 5.1 channel surround sound. Take the following points into account when connecting the optional speaker systems: • When the contents of these Operating Instructions from chapter 2 on describe a specific model, use those portions dealing with the HTP-610. • For information regarding the installation and connection of optional speaker systems, consult the information provided with the optional speaker systems, together Speaker Setup (HTP-610) on page 20 portion of these Operating Instructions. • See Automatically setting up for surround sound (MCACC) on page 51 to set up your system again using MCACC. 31 En