Pioneer HTP-710 Operating Instructions - Page 90
S-SWR500FS Speaker system (HTP- FS510), Cleaning the unit, FS510
View all Pioneer HTP-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
10 Additional information S-SWR500FS Speaker system (HTPFS510) • Front speakers Enclosure Closed-box floorstanding type (magnetically shielded) System 2-way system Speakers: Woofer 5.2 cm cone type x2 Tweeter 2.6 cm semi-dome type Impedance 4 Ω Frequency range 60 Hz to 20 kHz Dimensions: Without speaker stand 77 mm (W) x 395 mm (H) x 55 mm (D) With speaker stand . . . . . 126 mm (W) x 462 mm (H) x 126 mm (D) Weight: Without speaker stand 1.0 kg With speaker stand 1.3 kg • Accessories Speaker cables 2 Speaker stand bases 2 Poles 2 Gaskets 2 Screws (short 8 Screws (long 4 S-SB510 Speaker system (HTP-SB510) • Speaker Enclosure Closed-box System 4 cm x 7 cm 1-way system Speakers 4 cm x 7 cm cone type x6 Impedance 4 Ω Frequency range 70 Hz to 20 kHz Dimensions: Without speaker stand 800 mm (W) x 57 mm (H) x 85 mm (D) With speaker stand 800 mm (W) x 100 mm or 88 mm (H) x 102 mm (D) Weight: Without speaker stand 1.8 kg With speaker stand 1.9 kg • Accessories Speaker cable 1 Speaker stands 2 Screws 2 Small Non-skid pads (for speaker stand or speaker 10 Note • The specifications are applicable when the power supply is 230 V. • Specifications and the design are subject to possible modifications without notice, due to improvements. Cleaning the unit • Use a polishing cloth or dry cloth to wipe off dust and dirt. • When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers. • Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface. Published by Pioneer Corporation. Copyright © 2010 Pioneer Corporation. All rights reserved. 90 En