Pioneer KEH-P4020 Owner's Manual - Page 14

Multi-CD Player Playing a CD 1 2 3 You can use this unit to control a multi-CD player, which is sold separately. 1 TRACK NUMBER indicator Shows the track currently playing. 2 PLAY TIME indicator Shows the elapsed playing time of the current track. 3 DISC NUMBER indicator Shows the disc currently playing. 1 Press SOURCE to select the multi-CD player. 2 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/-, the volume is lowered. 3 Select a disc you want to listen to with the 1 to 6 buttons. For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. • You can also sequentially select a disc by pressing 5/∞. 4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes • When the multi-CD player performs the preparatory operations, READY is displayed. • If the multi-CD player does not operate properly, an error message such as ERROR-14 may be displayed. Refer to the multi-CD player owner's manual. • If there are no discs in the multi-CD player magazine, NO DISC is displayed. 13 En