Pioneer MEP-7000 Owner's Manual - Page 43

English ADVANCED OPERATIONS SECTION [2] Jog break effect When jog mode is set to [JOG BREAK], the screen on the controller side switches to jog break effect mode. MEMO • The jog break effect mode is not supported when DJS or other DJ software tracks are loaded. 1 During playback, press one of the function buttons [JET/ ROLL/WAH]. • The selected effect is shown in the center display, and the respective effect is changed in response to the rotation of the jog dial. 2 Effect HOLD • Normally, when you remove your hand from the jog dial the current effect stops and the also returns to its original status. By pressing the select up () button is pressed on controller A, or the select down () button on controller B, even if the hand is removed from the jog dial, the effect responding to the current position of the jog dial is maintained (HOLD function). When the button is pressed again, the function returns to normal. • During HOLD, the JOG BREAK indicator will light red, and the screen's [HOLD ON] indicator will light. About JET Delay time is changed in response to the jog dial rotation and a short delay is mixed with the playback sound, thus producing interference between the two sounds and resulting in a jet-like "SCHWA-" sound effect. In linkage to the effect the JET image animation is displayed (WAVE display) MEMO • When you remove your hand from the jog dial, sound will gradually return to the original sound. About ROLL In response to the rotation of the jog dial, the pitch and playback time are changed, and effect applied to the playback sound. MEMO • The sound playing at the time the jog dial is touched is continuously looped and roll is applied. • When you remove your hand from the jog dial, the playback returns to the original sound. • In linkage to the effect, the ROLL image animation will be displayed (a ball in orbit will appear; the orbit of the ball and its speed will change in response to the rotation position and direction of the jog dial.) 43 En