Pioneer PDA-5004 Operating Instructions - Page 31

PICTURE/SCREEN Adjustment English PICTURE/SCREEN Adjustment Adjusting screen POSITION, CLOCK, and PHASE By pressing the AUTO SET UP button on either remote control unit or the plasma display's operating panel (or by selecting [AUTO SET UP MODE] from the menu), the unit will automatically set the screen position and clock to best match the current image input. When the button is pressed, the optimum settings are automatically selected for the current input source. AUTO SET UP Remote control unit AUTO SET UP Display operating Panel Press the AUTO SET UP button on either the display or remote control unit. AUTO SET UP Notes ÷ This setting is supported only when a computer signal is connected to INPUT1 or INPUT5. ÷ Perform this adjustment individually for each input function (INPUT1 or INPUT5), and each signal type. ÷ Optimum settings may not be possible for low-luminance and certain other signals. In such cases, use the adjustment methods explained on the next page, "Adjusting screen POSITION, CLOCK, and PHASE ". 28 En When the automatic setup mode is selected, the unit will automatically be adjusted to the optimum image settings whenever the power is turned on, the input source is changed, or the type of input signal is changed. MENU 5/∞ 2/3 SET MENU 2/3 SET 5/∞ Display operating panel Remote control unit 1 Press the MENU button to display the menu screen. MENU PICTURE SCREEN CONTRAST : BRIGHTNESS : COLOR : TINT : SHARPNESS : SETUP 0 0 0 0 0 INPUT1 OPTION PICTURE RESET SET ENTER MENU EXIT 2 Use the 2/3 buttons to select [OPTION]. MENU INPUT1 PICTURE SCREEN SETUP OPTION LANGUAGE ENERGY SAVE SCREEN MGT. ORBITER MASK CONTROL AUTO SET UP MODE AUTO FUNCTION AUDIO OUT : ENGLISH : STANDARD : OFF : OFF : ON : INACTIVE : OFF : FIXED SET ENTER MENU EXIT