Pioneer VSX-24TX Owner's Manual - Page 31

Surround Sound Set Up SET UP Crossover Network The following steps show you how to adjust the crossover network. The crossover network is the frequency at which the system divides the signal and sends the different parts (high ,mid, low) to different speakers. Speaking precisely, this setting sets the cutoff point for the bass frequencies rerouted from your SMALL speakers to your sub woofer or speakers set to LARGE. If continuing from CHANNEL LEVEL go to step 1. If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p.24) first. S0URCE MULTI OPERATION Î SYSTEM OFF RECEIVER DVD/LD TV/SAT VCR1 VCR2 MULTI CONTROL CD MD/ TAPE1 TUNER TVCONT CLASS MPX ¶ 7 - + TUNING 1¡ DTV ON/OFF DTV MENU BAND DIRECT ACCESS 38 - + STATION 4¢ - + CHANNEL 1 2 3 4 5 6 7 GUIDE +10 8 9 EXIT 0 ENTER DISC TV TV VOL TV CONTROL TV FUNC VOLUME EFFECT /CH SEL MENU MUTE FUNCTION SYSTEM SETUP ENTER THX /dts ADVANCED SIGNAL SELECT STANDARD REMOTE SETUP MIDNIGHT DSP STEREO DIGITAL NR DIGITAL MULTI PROCESSING AMPLIFIER REMOTE CONTROL UNIT 1-3 1 Select CROSSOVER NETWORK (if continuing from CHANNEL LEVEL, it will already be selected). See "Setting Up for Surround Sound" on page 24 if you are unsure how to do this. Press ENTER. Crossover Network Frequency [ 80Hz] (THX Speaker = 80Hz) [EXIT] memo The default setting is 80 Hz. 2 Specify the crossover frequency for your small speakers. Setting speakers to SMALL in "SPEAKER SETTING" sends the respective channel's bass frequencies to the sub woofer (or LARGE speakers). The present function lets you determine which frequencies will be sent to the sub woofer or LARGE speakers. 1 Press 2 or 3 to move the hand to 80 Hz, 100 Hz, or 150 Hz. 2 Press ∞. 80 Hz Sends bass frequencies below 80 Hz to the sub woofer (or LARGE speakers). 100 Hz Sends bass frequencies below 100 Hz to the sub woofer (or LARGE speakers). 150 Hz Sends bass frequencies below 150 Hz to the sub woofer (or LARGE speakers). As noted on your TV screen the THX setting is 80. Select this setting if you have THX approved SMALL speakers. Experiment with the different settings to see which sounds best to you. 3 Select EXIT to return to the SYSTEM SETUP MENU. Next, proceed to BASS PEAK LEVEL MANAGER below. If you want to change a setting before proceeding Select a new crossover frequency. 31