Pioneer VSX-53 Owner's Manual - Page 72

!

Upon shipment from the factory, the password

is set to “0000”.

Important

When the

HOME MEDIA GALLERY

input is

selected, the setting made here cannot be

reflected. Set the input to something other than

HOME MEDIA GALLERY

before making this

setting.

1

Select ‘Parental Lock’ from the

Network Setup menu.

2

Input the password.

Use

i

/

j

to select a character,

k

/

l

to set the

position, and

ENTER

to confirm your selection.

3

Specify whether to turn Parental Lock

on or off.

!

OFF

– Internet services are not restricted.

!

ON

– Internet services are restricted.

4

If you want to change the password,

select Change Password.

In this case, the procedure returns to step 2.

Port Number Setting

On this receiver, there can be up to 5 numbers

of ports where signals are received. One of

these, port 8102 which used for communicating

with iControlAV2, cannot be changed, but the

desired number can be set for the 4 other ports.

1

Select ‘Port Number Setting’ from the

Network Setup menu.

2

Select the port number you want to

change.

3

Input the port number.

!

Use

i

/

j


k

/

l

to

set the position, and

ENTER

to confirm your

selection.

!

It is not possible to set the same port number

more than once.

4

If there are other port numbers you

want to change, repeat steps 2 and 3.

Note

!

When the wireless LAN converter (AS-WL300)

is connected, the port number cannot be set

to port 3.

!

We recommend setting the port number to 23

or within the range of 49152 to 65535.

!

When the port number is changed, network

communications between the receiver and

AVNavigator are no longer possible. In this

case, click

Settings

on the AVNavigator’s

function menu, select the IP Address tab

and input one of the port numbers set on the

receiver side to enable communications with

AVNavigator.

Wireless LAN Converter

This setting is required for connecting a wire-

less LAN converter to the receiver and using

wireless network functions.

For the wireless LAN converter, use the sepa-

rately sold AS-WL300.

Access Point Setting

Make the connection settings for the wireless

LAN converter connected to the receiver and

the access point. Connect the wireless LAN

converter to the receiver and set DHCP on the

“

IP Address, Proxy

” settings menu beforehand

(page 71). There are four way to make the set-

tings for connecting to the access point, as

shown below.

!

WPS (PBC)

– Connection settings are made

automatically simply by pressing the WPS

buttons on the access point and wireless LAN

converter, following the instructions displayed

on the receiver’s screen. This is the simplest

way of making the settings, and is possible

when the access point and wireless LAN

converter are equipped with WPS buttons.

Network connection settings require

approximately 2 minutes from the time the

En

72

12

The System Setup and Other Setup menus

‘

Secondary DNS Server

’ in the other DNS

server address field.

Proxy Hostname

/

Proxy Port

This setting is required when you connect

this receiver to the Internet via a proxy server.

Enter the IP address of your proxy server in the

‘

Proxy Hostname

’ field. Also, enter the port

number of your proxy server in the ‘

Proxy Port

’

field.

1

Select ‘IP Address, Proxy’ from the

Network Setup menu.

2

Select the DHCP setting you want.

When you select

ON

, the network is automati-

cally set up, and you do not need to follow Steps

3. Proceed with Step 4.

If there is no DHCP server on the network and

you select

ON

, this receiver will use its own

Auto IP function to determine the IP address.

!

The IP address determined by the Auto IP

function is 169.254.X.X. You cannot listen to

an Internet radio station if the IP address is

set for the Auto IP function.

3

Enter the IP Address, Subnet Mask,

Default Gateway, Primary DNS Server and

Secondary DNS Server.

Press

i

/

j

to select a number and

k

/

l

to

move the cursor.

4

Select ‘OFF’ or ‘ON’ for the

Enable Proxy Server setting to deactivate

or activate the proxy server.

In case you select ‘

OFF

’, proceed with Step 7. In

case you select ‘

ON

’, on the other hand, pro-

ceed with Step 5.

5

Enter the address of your proxy server

or the domain name.

Use

i

/

j


k

/

l

to set the

position, and

ENTER


6

Enter the port number of your proxy

server.

Use

i

/

j


k

/

l

to set the

position, and

ENTER


7

Select ‘OK’ to confirm the IP Address/

Proxy setup.

Network Standby

This setting allows the AVNavigator or iContro-

lAV2 function for operating the receiver from a

computer connected on the same LAN as the

receiver to be used even when the receiver is in

the standby mode.

1

Select ‘Network Standby’ from the

Network Setup menu.

2

Specify whether the Network Standby

is ON or OFF.

!

ON

– The AVNavigator or iControlAV2

function can be used even when the receiver

is in the standby mode.

!

OFF

– The AVNavigator or iControlAV2

function cannot be used when the receiver

is in the standby mode (This lets you reduce

power consumption in the standby mode).

Friendly Name

1

Select ‘Friendly Name’ from the

Network Setup menu.

2

Select ‘Edit Name’ then select

‘Rename’.

If after changing the name you want to restore

the name to the default, select

Default

.

3

Input the name you want.

Use

i

/

j


k

/

l

to set the

position, and

ENTER


Parental Lock

Set restrictions for using Internet services. Also

set the password accompanying the usage

restrictions.

Pioneer VSX-53 Owner's Manual - Page 72

Proxy Hostname, Proxy Port

Page 72 highlights